Q32一系列履帶拋丸清掉機

◆軟件特別 Product features

本輪胎式噴砂機比較適合多產品種類，大中快速制作部件的漆層除銹方法或拋丸突破，清理工作部件可以都不怕摩擦的單重在150kg低于的鑄件及熱工作件，機械既可單機手游應用，又可配線應用. 歸屬鑄造機械化範圍。

自然：將鋁件復制到膠履帶輥筒中，運營員按著“運轉”功能鍵，拋丸室門油路分配器開起，拋丸清潔起，履帶向前跑運轉，鋁件逐漸地完成翻滾，超強力拋丸器將拋丸高速收費站拋噴到在翻滾的鋁件的表面上，鋁件可完全性均衡地達到清潔。鋼丸確認履帶上去的溜孔注入槽式輸料機，再將鋼丸輸料到斗式大幅斗提機，經斗式大幅斗提機大幅升高到離心分離機，被離心分離后內存以備。拋丸完結后，拋丸室門自然開起，履帶倒轉，將鋁件卸出。

帶有大量手動：儀器是采取繞城高速換向的風輪將彈丸拋向履帶內連繼滑動的鋼件上，導致高達清潔鋼件的效果。它常中用各行各業業中的小行鑄件、鍛件、冷沖模件、傘齒輪、扭簧等件的清砂、除銹防銹、去氧化物皮和從表面提升。超聲波焊接機是標準化國內外新技術，設計的概念制作的新物品，就是一種清潔錯誤率好、形式緊身、嘈音小、成套配電柜性好的清潔儀器。

This machine is suitable for various  large and medium-sized batch production of workpiece surface derusting or peen-forming strengthening, clean up the work-piece must be not afraid of the collision of the single is is 150 kg of the casting and heat treatment, the machine can not only a single use, and wiring use. Belong to casting machinery.

Automatic: the workpiece in rubber crawler roller, the operating personnel press "run" button,  shot room door close behind, pneumatic blast cleaning began to run forward, tracked, workpiece constantly, efficient and powerful shot peen-forming high-speed mixer trajectory to is back on the surface of workpiece, workpiece can completely evenly clear. Steel shot through the crawler sneak into the hole, then screw conveyor will be sent to the steel shot a hoist, a type of the hoist to ascend to the separator, separated by storage to use. Is shot ended, is shot room door open automatically, tracked reversal, discharged the workpiece.

Manual operation: This machine uses high-speed rotary projectile impeller will throw to turn over the workpiece in continuous caterpillar, so as to achieve the purpose of cleaning up the workpiece. It is used in the industries of small-sized castings, forgings, stamping, gear, springs, and a rust-removing, derusting, to oxide skin and surface strengthening. This machine is comprehensive technology, the development of domestic and foreign design new products, it is a kind of cleaning efficiency high, compact structure, the noise is small, systematic good cleaning equipment.

◆物品基本特征 Product features

1.遠程服務器按照了懸臂軸流式式拋丸器，具備有在使用平均壽命和的結構簡單化等特色。

2.用BE型分割器，體現了健康的分割成效和制作率，對提高自己樹葉有提高認識的用。

3.分為袋式布袋除塵器設備，灰塵進行排放鹽濃度最低國度法律法規的的標準，大地面改進了控制者的勞功環保。

4.主要包括防腐蝕生橡膠履帶，可減輕了對工件的的相撞及直接損傷環境，削減了機械的環境噪聲。

1. The machine adopts the cantilever centrifugal peen-forming device, with long service life and simple structure.

2. The BE separator has the good separation results and higher productivity, which has positive effec to the blade.

3. The bag filter, dust emission concentrations below the standards prescribed by the state, have greatly improved operator working environment.

4. The wear-resisting rubber crawler, less on the collision and damage, reduce the noise of the machines.

◆不適用比率 Applicable scope

      壓鑄件、五金機械鑄件、五金機械鍛件等的徹底清除、光飾。洗去熱正確凈化處理件、鑄件、鍛件的外表面氧化的皮。氣彈簧的強化裝備。擰緊件除銹防銹和前正確凈化處理。

1、參考國外八十五年末的拋丸機廠家使用國廠化研發。

2、分為直聯大力拋丸器，分享熱效率好，拋丸量大。

3、風選剝離器、丸砂剝離率超過99%。

4、彈丸所覆蓋豎直，無拋丸墻角。

5、耐腐蝕件安全使用使用期限長，撤換不斷。

6、設施低燥音運動。

7、電力設備選擇繼物品（或PLC）操控，操控柜、光控報警裝置，PC用于西門子系統知名企業品牌，具體原元器件用于西門子系統中外合資知名企業品牌操控簡單的、能信。

Die casting, precision casting, precision forging of cleaning, light ornaments. Remove heat-treated pieces, castings, forgings surface oxide skin. The  strengthening of the spring. Fasteners derusting and former processing.

1. Reference to Germany at the end of the ninety’s shot used the machine manufacturing.

2. The efficient direct coupling strength is shot, transfer the high efficiency, is shot amount is large.

3. Efficient wind separator, pill isolating rate of more than 99% of sand.

4. Projectile enclothe even, without peen-forming blind angle.

5. Wear parts of long service life, change quickly.

6. Low noise operation.

7. Electrical use relay (or PLC) control, control cabinets, sound and light alarm device, PC using mitsubishi brand,mainly by Siemens brand original device operation is simple, reliable joint venture.

◆重點技術設備產品參數 Main technical parameters